Archive for the ‘Line 6 G30’ Category

Pedal Boards

September 7, 2017

Some folks have asked about my pedalboard and what I use. 


I basically have 3 systems each has thir purpose.  They are as follows. 

#1 the most.  Its main component is the Grace Design AliX that dose the Gain, EQ, Bost, Effects loop, DI out to get the signal I use s Saturn Works A/B Switcher one signal is wireless A and the other is s cable B into a one line out. This goes to the Grace AliX I do the Gain structure hear and eq the lows and tame 110Hz on High I give 1-2db bost.   I run a tuner the DÁDDARÍO pedal tuner from line out. My effects loop has the KoKKo Space Reverb and Digitech Jam Man Solo XT Looper.  I use this on my 3 giging guitars the Andy Culpepper Blanca with Lr Baggs Dual Source,  JDZ Blanca with LR Baggs and a Cordoba GKSL with Fishman Dual Source.

**Update** 9/7/17 

I wanted to have the Boss AD-2 for gigs without a Pedalboard and to use with Behringer Europort MPA40BT.  So I put the Fishman Aura Nylon on.


#2 Grace BiX to a KoKKo Reverb and a TC Electronic Ditto Looper.  Smaller board and less control but great sound.  Easier to travel with.  I do at time move the Line 6 Wirless over to this pedal board too.  I use this on my 3 giging guitars the Andy Culpepper Blanca with Lr Baggs Dual Source, JDZ Blanca with LR Baggs and a Cordoba 
#3 Boss AD-2 Pedal I use it for locations where there’s not easy access to AC power and for smaller events like weddings, cocktail hour on the beach.   I generally use the pedal with the Behringer Europort MPA40BT battery powered PA speaker.  Generally the Cordoba GKSL is the guitar I use. 

#4 Boss AD-10 When the new AD-10 becomes available I will try the new digital Preamp out.  

Advertisements

New Grace Design AliX pedalboard setup

July 1, 2016

New Pedalboard Layout. One of the best things about Grace Designs AliX is that there’s enough power to power all these pedals and wirless receiver. No messy power supply or extra cables. I run this direct into my mixer, Bose L1 Compact or Bose L1II wB2 sub & ToneMatch mixer, or a powered speaker like QSC K8. Thanks Eben Grace and Team at Grace AliX ROCKS! The board is: Grace AliX, input from Line 6 Relay G30- AliX, from efx loop (TC Electronic HOF Mini-DigiTech JamMan Solo XT w FS3X Switch) back to AliX and out via DI in AliX. All pedals are powered from AliX. The pedal board is the Pedaltrain Metro 20.

Gig Rig JDZ & Pedal Board

November 9, 2015

  
Updated “Gig Rig” all starts with a custom hand made Flamenco Cedar Blanca made by Jorge de Zofia of Palm Beach FL. I use D’Addarío EJ45 or EJ45C and EJ25C.  It’s outfitted with a L.R. Baggs Dual Souce Pickup System (Element & Mic) to a Line 6 Relay 30.  Then it’s all Eq’ed in the Grace Designs FELIX preamp.  (At times I also use the DPA 4099 G mic) on all my guitars. In the effects loop I have a Strymon Big Sky, to a DigiTech Jam Man Solo XT with a FS3X foot switch, to a BBE Sonic Stomp back to Felix. The pedals are mounted to the Pedaltrain Fly board.  I use the Bose L1 Compact or QSC TouchMix 8 and QSC K10’s. 

Line 6 Relay G30

August 13, 2015

  
  
I have been using my Line 6 Relay 30 for over a year.  I purchased it at Sweetwater to use with my Flamenco Guitars.  At this time I’m using it with my JDZ guitar outfitted with the LR Baggs Dual Source and Córdoba F7 Paco with a Fishnan Presus Blend.  Both are a two source a UST and Mic that are blended.  With the Line 6 I can be free of the wires and walk around.  I get a great sound and pick up the percussive techniques in the Flamenco style especially the glopes.   I use the G30 with a Grace Felix Preamp or direct to a QSC Touch Mix 8.  It’s a great inexpensive system. 😎